Need water heater repair right now? If your tank is leaking, shut off the cold-water inlet valve above the tank first (see below), then call us — AVS Heating and Air Conditioning provides same-day water heater repair and water heater service across Northern Virginia and Maryland, 24/7, with no extra charge on evenings, weekends, or holidays. One $90 visit, a written price before any work starts, and a technician who repairs all brands. Family-owned since 1991, 4.8 stars from 354 Google reviews.
Request service online and we call you back fast. If you have no cooling or no heat, call us directly.
Water damage gets expensive fast, so do this before anything else:
Once the water is off, call us. We answer 24/7. If you’d rather not drain anything yourself, don’t; the technician will handle it on arrival.
Most water heater failures announce themselves clearly. Here’s what each symptom usually means:
No hot water. On a gas unit, the pilot may be out or the thermocouple has failed. On an electric unit, a heating element or upper thermostat may have died, or the high-limit reset tripped. The technician tests each component, so you only pay for the part that actually failed.
Leaking water heater. Leaks from the top usually mean a loose connection, a failing T&P valve, or a corroded inlet — often repairable. A leak from the bottom of the tank, or rust-colored water pooling at the base, usually means the tank itself has corroded through. The technician will tell you which one you’re looking at.
Rusty or discolored hot water. If only the hot water runs rusty, your tank’s anode rod is likely spent and the tank interior is corroding — or sediment has built up badly. If cold water is rusty too, it’s probably the supply lines, not the heater. Either way, don’t ignore it; rust means the tank’s days are numbered.
Popping or rumbling noise. That’s sediment — minerals from the water boiling and shifting at the bottom of the tank. It’s common where water is hard. A flush often silences it, but years of ignored sediment can damage the tank bottom. A flush plus an anode rod check shows the tank’s real condition.
Pilot light won’t stay lit. Often a dirty or failed thermocouple — the small sensor that tells the gas valve it’s safe to stay open. It’s usually a quick, inexpensive repair.
Reset button keeps tripping. On electric units, the red reset (high-limit) button trips when the water overheats — usually a failing thermostat or a shorted heating element. Resetting it repeatedly without fixing the cause is a bandage. The fix is to find and replace the failing component.
We repair all three types, and each has its own failure pattern:
Gas water heaters: pilot and ignition problems, failed thermocouples, gas valve issues, and burner or venting problems. Gas units also need venting and draft checked, not just the failed part.
Electric water heaters: failed heating elements, bad upper or lower thermostats, tripped high-limit switches, and wiring or breaker problems. Electric water heater parts are standard, so many repairs are quick.
Tankless water heaters: error codes, ignition failures, mineral-scale buildup choking the heat exchanger, and flow-sensor problems. Tankless units in hard-water areas need regular descaling to run efficiently; if yours has never been serviced, a flush and descale often restores performance without replacing a single part.
This page also covers water heater maintenance — because many of the failures above are preventable. Sediment builds up in every tank, and where water is hard, an annual flush helps extend a tank’s life. A proper maintenance visit includes:
If your water heater is over five years old and has never been flushed, it’s overdue.
Here’s a simple rule of thumb:
Repair it when the unit is under 8 years old, the problem is a single failed part (thermocouple, element, thermostat, valve), and this is its first or second service call. Most repairs cost far less than replacement and buy you years.
Replace it when the tank itself is leaking or rusting through, the unit is 10–12+ years old with repeat breakdowns, repairs are stacking up toward a big fraction of replacement cost, or your household has outgrown the tank’s capacity. A failing tank doesn’t get better — it gets wetter.
If replacement is the right call, our water heater installation service includes free estimates, help sizing the right tank (40 vs. 50 gallon matters more than most people think), and Wells Fargo financing with 0% APR up to 18 months on select units, zero-down plans available, subject to lender approval.
A $90 visit covers the diagnosis. Before any work starts, you get the repair price in writing. No overtime surcharges and no “it’s Saturday” fees. What affects the final number is straightforward — gas vs. electric vs. tankless, which part failed, and whether the unit is in an accessible spot (attic and crawl-space units take longer). Emergency water heater repair at 2 AM costs the same as a Tuesday afternoon. Ask us about current rebates and we’ll tell you which ones apply to your situation.
Get a safety inspection from AVS Service Company today for only $69.
CLAIM THE $69 INSPECTIONMajor credit cards, Zelle, Cash App, Venmo, or Wells Fargo financing.
Zero-down payment plans, including 0% APR for up to 18 months on select units, subject to lender approval.
Two maintenance and safety inspections a year, priority service and discounts on repairs. Join the VIP plan →
Offers as listed on avsheatingandair.com/hvac-coupons. Mention the offer when you call.
“AVS recently fixed an issue with our hot water heater. They were effective, professional, and communicative. We will use them again for any issue that pops up.”
“They did a great job replacing my hot water heater. Great customer service and price.”
With offices in Fairfax, Falls Church and Bethesda, AVS technicians work across the region every day. Choose your city:
Usually not — a leak from the bottom of the tank almost always means the steel tank has corroded through, and tanks can’t be patched safely. Leaks from the top (fittings, valves, connections) are usually repairable. We’ll confirm which you have during the $90 visit.
Leave the house immediately. Do not turn anything on or off, do not touch the gas valve, and do not stay to investigate. Call 911 or your gas company from outside. Gas safety is never a DIY situation.
The reset (high-limit) button trips because the water overheated — pressing it treats the symptom, not the cause. A failing thermostat or shorted heating element will trip it again. The underlying part needs to be found and replaced so it stays fixed.
Most single-part repairs — elements, thermostats, thermocouples, valves — usually take an hour or two. For tankless units, see tankless water heater repair and descaling.
No. We’re 24/7 with no extra charge on evenings, weekends, or holidays. A leaking tank at midnight costs the same as a scheduled afternoon visit.
For a week or more, turning an electric unit off at the breaker (or setting a gas unit to its vacation/pilot setting) saves energy while you’re away. Just give it time to reheat when you return.
A family-owned team since 1991, a $90 site visit, the price before work starts, and no extra charge for evenings, weekends or holidays.
Virginia HVAC 2705039269A · Maryland HVAC 520714137895 · Maryland Home Improvement 4192876